thank for replies.
the same happened to me, i only changed my bulb.
-papz d2 sa pix yung nka box ng yellow wala ka na ibang ikkabit???? putulin lng yung yellow wire????
taz yung maliit na pix sa baba yung other end ng yellow wire nka hang lng???
One end of yellow wire will be connected to the ignition brown wire. The other end of yellow wire(from the stator) will have no connection.
-papz d2 sa pix yung nka box ng yellow wala ka na ibang ikkabit???? putulin lng yung yellow wire????
taz yung maliit na pix sa baba yung other end ng yellow wire nka hang lng???
UP!mine also...gr..
this also happened to me, try changing your bulb. btw, the cracking sounds from mine is from the bulb, not the ballast.
so in short this is not normal?
it's not normal
tik sound in relay is normal once the relay is powered/activated...test your ballast or your wirings/connections paps...when i turn on my hid.. it has a tick sound in the Relay.. when i push the hi/lo, it works.. but the bulb doesnt turn on, but when i tried my bulb to the other mc with hid.. it turns on.. what is the possible deffect of my hid?? Relay or BallasT?
sorry for my BAD ENGLISH
i removed all the wirings paps including the bulb.. and tested it "REKTA" on the battery.. and ganun parin sya.. so it means my relay is working ??
It could be defective ballast. Relay is ok if you heard tik sound when headlight switch turned on.when i turn on my hid.. it has a tick sound in the Relay.. when i push the hi/lo, it works.. but the bulb doesnt turn on, but when i tried my bulb to the other mc with hid.. it turns on.. what is the possible deffect of my hid?? Relay or BallasT?
sorry for my BAD ENGLISH
ohhh.. if the ballast is deffective, did the bulb can move to hi/lo ?It could be defective ballast. Relay is ok if you heard tik sound when headlight switch turned on.
Yes, high/low still moves when switch from high to low. Supply of HID bulb high/low solenoid came from HID wiring harness.
