My New SNIPER MX ^_^

Juno · Aug 30, 2011

Juno said:
sir.. 105km/h?? on 3rd gear????... rpm limit for stock mx goes around 80-85.. doing 105 stock is impossible..

80-85km/h on 3rd gear **

Juno · Aug 30, 2011

Adrian Relato said:
dkp na test bro.

115-120 depends on the weight... you have 14/38 stock??.. woah!! my mx has 15/39 haha.. but already changd it, had an rcdi in it.. 28mm carb.. changed my sprocket set.. coz on stock.. 5th gear fels kinda off..

frox · Aug 30, 2011

Juno said:
sir.. 105km/h?? on 3rd gear????... rpm limit for stock mx goes around 80-85.. doing 105 stock is impossible..

bro juno you are right on 3rd gear 80kph only.o105kph on 3rd gear impossible

Juno · Aug 30, 2011

frox said:
bro juno you are right on 3rd gear 80kph only.o105kph on 3rd gear impossible

yup.. coz i have my mx for almost 4 months na hehe had one a fw weks after it was ndorsed here in the phil.... most mods i have are all converted from sniper classic.. hhe oh btw the 2nd dition of RB rearset.. ithink will fit perectly to the mx..

Juno · Aug 30, 2011

not a 100% sure thoug.. ehehe

blackknightrealms · Aug 30, 2011

Juno said:
sir.. 105km/h?? on 3rd gear????... rpm limit for stock mx goes around 80-85.. doing 105 stock is impossible..

pafs i will not say that i if i havent done it. twice i done it. and this is my first sniper. i dont fool around and that's my experience. yes, i have no proof in showing it to you but next time try it. now on my CLD racing pipe installed. 1st gear has been push to 45, 2nd gear has been push to 80 plus 3rd has been push 100. and this what amazed me is its only 3/4 throttle. better we forg0t what what i said. IMHO sir.

yongx2 · Aug 31, 2011

Juno said:
sir.. 105km/h?? on 3rd gear????... rpm limit for stock mx goes around 80-85.. doing 105 stock is impossible..

bro nag try kana ng faito racing ignition coil sa mx mo? im planning to buy and install it to my sniper mx

Motorhead · Aug 31, 2011

Juno said:
WHAT?! 120-130 all stock??.. weh??? for real??. mines 100 km/h already at RPM limit on stock cdi... how can a bike with a 24mm carb and a stock cdi do that???.. haha damn then min is sloow i think

I used to replace cylinder & rings and do all over again when i found my Break-In was a failure; in this way i believe, could save me a dime in every liter of fuel i burn, too soon maintenance that can be frequent later on. This model made me so happy after only a few hundreds of kilometers of series of acceleration & deceleration, and made it to 60~63 kms/liter consumption with my daily farm chores. A very good Bike.

yongx2 · Aug 31, 2011

Motorhead said:
I used to replace cylinder & rings and do all over again when i found my Break-In was a failure; in this way i believe, could save me a dime in every liter of fuel i burn, too soon maintenance that can be frequent later on. This model made me so happy after only a few hundreds of kilometers of series of acceleration & deceleration, and made it to 60~63 kms/liter consumption with my daily farm chores. A very good Bike.

bro motorhead, are u from philippines?just wondering :rolleyes:

Motorhead · Aug 31, 2011

yongx2 said:
bro motorhead, are u from philippines?just wondering

yupz, i'm from Bogo City, Cebu brod Yongx2

yongx2 · Aug 31, 2011

i tot u were somewhere else coz nag nosebleed na me sa imong mga english.. gege

Motorhead · Aug 31, 2011

yongx2 said:
i tot u were somewhere else coz nag nosebleed na me sa imong mga english.. gege

a retired USAF

yongx2 said:
i tot u were somewhere else coz nag nosebleed na me sa imong mga english.. gege

a retired aircraft tech. bro Yongx2, 379 air expeditionary wing

frox · Aug 31, 2011

Motorhead said:
a retired USAF

a retired aircraft tech. bro Yongx2, 379 air expeditionary wing

bigatin ka pala bro.i have a friend from bogo also.her name is ailyn

Motorhead · Aug 31, 2011

frox said:
bigatin ka pala bro.i have a friend from bogo also.her name is ailyn

bigatin sa langis at maruruming grasa, parang Surf. i believe most of the ppl in this place knows me.

sniper_coj08 · Sep 3, 2011

were u from sir?,,meron nba rearset ng mx na racingboy?,,ung sa ibang model ng sniper sir hndi ba fit sa mx?mx din motmot koh,blue nga lng,,tnx,ridesafe

law · Sep 20, 2011

xxztrumzxx said:
My friends MX got problem... His sniper MX engine gets hot to fast.... we both use same engine oil... but his engine gets hot easily.. need help....
Thanks.....

Hi sir, your friend and I have the same problem with our smx... I already told the mechanic about it, he said it is normal for smx to gets hot easily, he told me that a certain level of heat will activate the fan/pump the coolant to the radiator... can any tell us if it is normal for sniper mx engine gets hot to fast.. for some time the engine is hotter than the inner pipe ( weeeeeeeeewwww)..

law · Sep 20, 2011

mga pre talaga bang mainit agad ang makina ng smx? noobie kc sa radiated na motor..

Adrian Relato · Sep 21, 2011

blackknightrealms said:
pafs i will not say that i if i havent done it. twice i done it. and this is my first sniper. i dont fool around and that's my experience. yes, i have no proof in showing it to you but next time try it. now on my CLD racing pipe installed. 1st gear has been push to 45, 2nd gear has been push to 80 plus 3rd has been push 100. and this what amazed me is its only 3/4 throttle. better we forg0t what what i said. IMHO sir.

bro where did you buy your cld pipe?

Paul Francis Cosgafa · Sep 23, 2011

wow gold same sa mx ko pro repaint to yellow

Paul Francis Cosgafa · Sep 23, 2011

My New SNIPER MX ^_^

New Member

New Member

New Member

New Member

New Member

Super Veteran

Super Veteran

New Member

Super Veteran

New Member

Super Veteran

New Member

New Member

New Member

New Member

Veteran

Veteran

New Member

New Member

New Member