Need Help ( About Coolant Goes Down To Reservoir )

[cAtzkie]

i got the same prob to, but mine is even if you ride the bike for short distance the engine is very hot.

 

[cAtzkie]

thighten the 4 studbolts...thats it....that was mechanic mistake..

4 studs bolts? from were parts?

 

[boogaks12]

Can't imagine ur problem...what r ur bike mods?

 

[cAtzkie]

Can't imagine ur problem...what r ur bike mods?

all stock bro.

 

[turbulence]

REPLACE TOPHEAD GASKET

 

[cAtzkie]

REPLACE TOPHEAD GASKET

thanks paps!

 

[turbulence]

thanks paps!

we had experienced that many times with different cases and the solution is always new tophead gasket.... reminder: any gasket maker wont work on any gasket with coolant. gasket maker only works on pure oil without coolant...

 

[ianghol]

we had experienced that many times with different cases and the solution is always new tophead gasket.... reminder: any gasket maker wont work on any gasket with coolant. gasket maker only works on pure oil without coolant...

just a question papi turbhow does the old head gasket affect the coolant going down to the reservoir if it was not change to a new one after a changing the cam and the valve spring for example?...hehehethankzzzz

 

[turbulence]

just a question papi turbhow does the old head gasket affect the coolant going down to the reservoir if it was not change to a new one after a changing the cam and the valve spring for example?...hehehethankzzzz

if you noticed there are like curve linings on ourtophead acting as springs which may flatten due to heat and compression. removing and putting it back may sag the gasket linings

 

[suiluj]

soaking o-ring- rubber gasket to a gas make it expand. putting sealang or gasket maker make it expand too. in my opinion. i replace my old o ring/rubber gasket from top cylinder head cover, o ring to my coolant top cover its big and small and my problem is gone.

 

[turbulence]

soaking o-ring- rubber gasket to a gas make it expand. putting sealang or gasket maker make it expand too. in my opinion. i replace my old o ring/rubber gasket from top cylinder head cover, o ring to my coolant top cover its big and small and my problem is gone.

that has nothing to do with the coolant going down to reservoir bro

 

[infinity01]

papz I'm just confused. w/c of these gaskets are needed to be replaced? I do have a problem too. but it's like the reverse. my reservoir was drained. i asked sir carlo he said it's not normal. I added new coolant if it drained again maybe i need to replace it. thanks

 

[turbulence]

better ckeck your water oilseal bro. the item number 2

 

[turbulence]

I believe this is what you mean sir, this is the gasket

 

[infinity01]

better ckeck your water oilseal bro. the item number 2

thanks papz

 

[infinity01]

I believe this is what you mean sir, this is the gasketView attachment 23780

is this the gasket they used to mention when there is a leak sir? thanks this would help very much sir

 

[turbulence]

is this the gasket they used to mention when there is a leak sir? thanks this would help very much sir

yes sir also known as TOPHEAD GASKET

 

[(sukiyama)]

pag kinalas head at di nagpalit head gasket pede mag kakasingaw sa head, o kaya katagalan din. yung singaw dadaan sa water jacket ng block at head, magkakahangin ang linya ng cooling system, waterpump, radiator hose at radiator, itutulak ang tubig papunta sa reservoir at saka tatagas hanggang maubos ang tubig sa rad. kaya mejo magiinit ang engine, pag napabayaan, overheat na. para matesting kung may singaw ang head, alisin takip ng rad., pag ni rev dapat walang bula ang tubig sa rad., gumagalaw lang dapat.

 

[boogaks12]

Any 1here using manual cam chain tensioner?

 

[boogaks12]

OT sorry...