Newbie Question Post It Here!!! [part Vi]

[Laeon]

sa mga nka SMX po jan, ano po sukat(diameter) nung yamaha emblem sa left and right side cowling? salamat po, in inch or mm will do

 

[shadowkhan]

mga master, newbie here. ok lang ba n mag install ako ng stage 1cam kahit all stock ang engine ko? ung stock cam ko kasi may tama na/hukay n yung lobe at makalansing na yung tunog ng makina. ano po ba dapat kong gawin at anong brand ang maganda? thanks in advance mga master.

 

[shedric]

mga master, newbie here. ok lang ba n mag install ako ng stage 1cam kahit all stock ang engine ko? ung stock cam ko kasi may tama na/hukay n yung lobe at makalansing na yung tunog ng makina. ano po ba dapat kong gawin at anong brand ang maganda? thanks in advance mga master.

CMS cams user here and satisfied. but in my opinion sir, if we would change our stock CAMS to racing CAMS we will also
have to change our stock Valve Springs and stock CDI. this is for our engine safety. hope it helps.
now using CMS CAMS, V-xion Valve spring & BRT hyperband CDI , i'm loving it. hehehe

 

[shadowkhan]

ive been using brt rcdi quite some time now. but due to engine problem, ive switch it back to stock cdi para dalhin sa 3s to have it check by a mechanic.then he found out that the lobe of my cam ay hukay na. anyway master shedric, would it be ok not to change the stock valve spring of the engine? magkano din po pala ung CMS st1 cam? and ung price n din po ng valve spring.. hehehe. tnx

 

[shedric]

ive been using brt rcdi quite some time now. but due to engine problem, ive switch it back to stock cdi para dalhin sa 3s to have it check by a mechanic.then he found out that the lobe of my cam ay hukay na. anyway master shedric, would it be ok not to change the stock valve spring of the engine? magkano din po pala ung CMS st1 cam? and ung price n din po ng valve spring.. hehehe. tnx

that's what i mean a while ago on my comment, that if we would replace Cams, V-spring & R-CDI at the same time
for engine safety purposes. i know CMS cams are already at stage-2 CAMS,
ask @kr.r_sniper for this items. thanks, hope it helps.

 

[john_carlo]

mga master, newbie here. ok lang ba n mag install ako ng stage 1cam kahit all stock ang engine ko? ung stock cam ko kasi may tama na/hukay n yung lobe at makalansing na yung tunog ng makina. ano po ba dapat kong gawin at anong brand ang maganda? thanks in advance mga master.

kung stage 1cam like vixion ok lang kahit stock cdi and stock valve spring

 

[shadowkhan]

masters, ung st1cam ng faito, maganda po ba ang feedback nyo dun? kamusta po ang performance?

 

[shedric]

ok naman xa, malaki rin difference on stock CAMS

 

[BlackSuede]

mga paps asko lang kung ok lang ba kung mag ca cam ako ng stage 1 sa stock bore vixion valve spring , crg clutch spring , brt rcd dualband lang set ng motor ko or pwede pa ko mag taas ng stage??

 

[thon]

mga paps asko lang kung ok lang ba kung mag ca cam ako ng stage 1 sa stock bore vixion valve spring , crg clutch spring , brt rcd dualband lang set ng motor ko or pwede pa ko mag taas ng stage??

Ok yan bro, mas maganda stage 2 cam kahit stock bore gamit mo..

 

[BlackSuede]

Ok yan bro, mas maganda stage 2 cam kahit stock bore gamit mo..

tnx paps ano magandang brand ng cam stage 2?

 

[shedric]

tnx paps ano magandang brand ng cam stage 2?

parehas gamit namen ni sir @thon CMS stage 2 CAMS

 

[BlackSuede]

copy paps salamat

 

[Cris Duarte]

Sir i'm looking caliper set of x1r.. i have a prob with my brake system until we recognize, my caliper kit is defect & i nead to replace a new 1.
Plss help me.. heres my # 09286675383 u can pm me.. tnx ^_^

 

[TheYaPower]

What kind of oil should i use for my Sniper ?, Motul 300v vs Shell Ultra and 10w40 or 15w50

 

[BlackSuede]

ask ko lang sabe kase sakin ng mechanico sa kingsly me posibilidad daw mag float ang vixion valve spring pag kinabitan ko ng cam. stage 2 mas ok daw stage 1 muna since stock bore naman ano po masasabe nyo?

 

[ricky0822]

ask ko lang sabe kase sakin ng mechanico sa kingsly me posibilidad daw mag float ang vixion valve spring pag kinabitan ko ng cam. stage 2 mas ok daw stage 1 muna since stock bore naman ano po masasabe nyo?

hindi naman paps

 

[BlackSuede]

ask ko lang sinisingel kase ko ng michanic ko ng 2.4k gagawin daw pang racing yung gilid sisigla daw motor ko lalo advisable ba un mga paps sa mga byahe ?

 

[ricky0822]

ask ko lang sinisingel kase ko ng michanic ko ng 2.4k gagawin daw pang racing yung gilid sisigla daw motor ko lalo advisable ba un mga paps sa mga byahe ?

in short paps mamaw na yang MC mo hihi

 

[ricky0822]

good for eveday use