Newbie Question Post It Here!!! [part Vi]

[JapSpeed]

mga master normal lng ba na mg iba tunog ng engine if mg valve spring? stock cam lng po... hindi naman tik2x sound. at hindi naman tutunog kng idle lng... jvt valve spring gamit ko..

 

[suplado010]

Ok lang po bah ikutin yung sa rear brake system na racing boy yung kinakabitan ng brake fluid reservoir?Nakaturu kasi sa baba yung hose e..

 

[nyr0]

Ok lang po bah ikutin yung sa rear brake system na racing boy yung kinakabitan ng brake fluid reservoir?Nakaturu kasi sa baba yung hose e..

pwede naman idol.. l8 rply pcncy na

 

[papam78]

Gudpm po! Sir, balak ko po mg big block pero stock heads p din po. Ano po b max size n mganda ilagay? X1r po byk ko. Tsaka nid po b palitan carb nya? Tnx po.

 

[Paul Orteza]

Ask ko lang po kung san mas okay magpagawa ng replica. Maraming salamat mga sir!

 

[jangbest]

Gudpm po! Sir, balak ko po mg big block pero stock heads p din po. Ano po b max size n mganda ilagay? X1r po byk ko. Tsaka nid po b palitan carb nya? Tnx po.

hanggang 59mm ang stock head, sa carb mas maganda kung big carb, pero pwede din stock carb rejet lang

 

[JapSpeed]

hanggang 59mm ang stock head, sa carb mas maganda kung big carb, pero pwede din stock carb rejet lang

ano kaya gas consumption ng 59mm block. as in plug and go lang... with stock carb nka rejet with stock cam, rcdi, and valve spring

 

[papam78]

Salamat sir s info.

hanggang 59mm ang stock head, sa carb mas maganda kung big carb, pero pwede din stock carb rejet lang

 

[papam78]

Last question mga sir, s 62mm po b n steel bore. Ok lng po b un s stock head paired with big carb? For everyday use lang po pero sna noticeable po un dagdag n lakas compared s stock.

 

[papam78]

D po b cya gagana s 62mm? Cnxa n po s mga tanong mga sir.

 

[jangbest]

Last question mga sir, s 62mm po b n steel bore. Ok lng po b un s stock head paired with big carb? For everyday use lang po pero sna noticeable po un dagdag n lakas compared s stock.

steel bore paps? mag crome bore ka hindi advisable ang steel bore sa daily use ...
pwede din naman stock head sa 62mm pero dapat naka port ang head mo diba @snipersolem gamit nya 62 naka port

 

[JapSpeed]

Mga Master, what would be the mixture kng madumi yng carb mo?
mg lilean pa or rich? thanks

 

[papam78]

Ganun po b? Cge po salamat po uli s info mga sir...

steel bore paps? mag crome bore ka hindi advisable ang steel bore sa daily use ...
pwede din naman stock head sa 62mm pero dapat naka port ang head mo diba @snipersolem gamit nya 62 naka port

 

[Julio25]

gud pm mga master pano po ba malaman kung naka align ang manibela ng sniper mx???pakiramdam ko parang naka paling sa kanan manibela nung naikabit na..

 

[Ptr.Jun]

steel bore paps? mag crome bore ka hindi advisable ang steel bore sa daily use ...
pwede din naman stock head sa 62mm pero dapat naka port ang head mo diba @snipersolem gamit nya 62 naka port

...What do you mean "Naka Port ang Head"
I'm planning to install 61mm bore with Stock Head...
Ano ang i modify sa Head?... valve,Valve Spring,at Cams?

 

[Ptr.Jun]

To veteran Sniper owners...
With 61mm Chrome bore, R Cdi, STOCK HEAD... Is that ok for everyday use and Long Distance?

 

[kikaipitoy]

To veteran Sniper owners...
With 61mm Chrome bore, R Cdi, STOCK HEAD... Is that ok for everyday use and Long Distance?

Using my 62mm with stock head for a few months..OK naman kaso mas ramdam mo talaga lakas sa big valves..just my two cents

 

[JapSpeed]

Using my 62mm with stock head for a few months..OK naman kaso mas ramdam mo talaga lakas sa big valves..just my two cents

gas consumption with your set up? please share us bro..

 

[kikaipitoy]

gas consumption with your set up? please share us bro..

My set: 62mm Bore, Vixion VS, Faito Turbo Cam, 28mm Carb, Mushroom Type Air Filter, Protec Ignition Coil, BRT Dualband CDI, LHK clutch springs, HGM GP Type Big Elbow,19/22 BV, 15/42 sprocket combi....

Before: between 40-48km per Liter
Now: Between 30-34km per liter

I think that's the down side of having a fast bike, but I never mind...IMHO if you don't like high consumption MC just stay stock...

 

[Ptr.Jun]

Using my 62mm with stock head for a few months..OK naman kaso mas ramdam mo talaga lakas sa big valves..just my two cents

Thanks! Nice Tip