• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

Noah's Sniper

Noah501

Super Veteran
Hey guys dami pala nagpost sa simpleng blog ko. Thanks for the visit. :)

@jerpe yes bro kakakuha ko lang ng disc brake ngaun. pero di ko pa mapapakabit kasi dadating bro ko galing canada pupunta nanaman kami ng davao bukas. Baka pagbalik pa mapakabit. Kinsa kaha pwede magtaod sa disc brake bro? motormate raman gud akong only choice. mas gusto unta ko mga expert sa sniper.

@macoolet uu bro parang ganun na nga ata ako eh yung girl na friend ko sinasabihan akong laging nagiisip at nakatingin pagnakapark ang sniper ko. :p ..Pero pagnakabit na yung mga simpleng accessories ko eh okay na cguru ako. (la nadin kasi pera :p). Swing arm would be my last plan kung hindi matuloy ang sports bike look na plan ko.

@jr_sniper135 uu bro hanggang ngayun parang ganun parin dumating pa yung sniper mx na ilang months lang lumabas na pagbili ko. Pero so far satisfied naman ako sa sniper ko ngaun dami nga tumitingin lalo na yung mga nakasunriser na sniper. hindi ko lang cguru naappreciate ang ganda ng sniper. pero malapit na pagnakabit na lahat ng mga plano ko. :)

@traxxas wala pang dumating dito samin sir admin eh binili daw lahat ng isang client yung 4 stocks ata ng tire hugger. Antay pako ng txt nila kung may dadating na.

@Rugzky it may take a while bro because kinda getting busy with my elder bro's arrival. Maybe it's gonna be another week.

UPDATE:

When I was going home, I slid down in mangima road. T__T .. Had a bruise in my hand and scratches on my knee and elbow guard but it served its purpose. The bike got some scratches on the guide rollers (I was amazed with this one I didn't think the bar ends would save my bike!) but the fairings were completely scratch-less. The footrest bended and some scratch on the pipe and the mags because of the platenumber but the bike still looks fine. I have to be careful next time though.

IMG_1477.JPG

Despite the crash I still managed to get a good picture in Atugan Bridge. I take time to stop over in middle of the bridge. :p
Me.jpg

I brought with me a cheap hand grips but I was having a hard time removing the bar ends even the shop at our hometown. Used vice grip but no good. anybody? maybe I'll ask the 3S crew when I get my bike for tune up.

In our hometown, sunriser snipers flood the streets. But when I pass by many motorcyclists stares at my bike. Iba talaga ang orig. :D
 

john_carlo

Super Veteran
FYI RB reardisc kit doesnt have a hub for the rotor because its plug and play with the rb mags disc ready that hub is for the sprocket... if your using a drumbrake mags you will use your stock sprocket hub.. using stock mags need to fabricate a hub for the rotor and RB reardisc kit does not fit to the stock mags you need to shave the stock mags in order the caliper not to kiss the mags just like this drumbrake convert to disc ready, this mags is same size with the stock



RB disc ready mags

this is the rb sproket hub that you are reffering sorry for the dirty bike rainy yesterday


 

Rjloks

Super Veteran
kung ganun din na hnd cya fit eh bakit pa tinawag rear disk converstion kit???
it should fit kasi nga kit cya... sa palagay nyo guys and gals?? specially mga master???
 

jerpe3

Super Veteran
rb rear disk brake kit it designed para sa mga rb rear disk ready magz......

nde para sa mga stock mags ng sniper...

~_^V
 

john_carlo

Super Veteran
kung ganun din na hnd cya fit eh bakit pa tinawag rear disk converstion kit???
it should fit kasi nga kit cya... sa palagay nyo guys and gals?? specially mga master???
nakalahay sa kit sir ay eto intall only


rb rear disc kit sya sa rb disc ready mags din...

actually hindi talaga RB reardisc convertion ang nakalagay sa kahon, RB Rear Brake System lang:)
 

Method21

Super Veteran
benta mu yan o bili ka ng RB mags na Rear disk system ready para magamit mu ang item bro..god speed ahead..isip2x always..
 

JamesCore

Super Veteran
san ba nabili yung item? pwede naman ibalik yan sa pinagbilihan.. di na pwede mabawi ang pera ang gagawin eh change item lang.. pwede papalit yan paps balik mo lahat kasama yung hub na sablay para palitan ng hub na sukat sa disc.
 

john_carlo

Super Veteran
pero sir ok lng din b ung stock hub s RB magz?
kung rb disc ready sir di pwede yung stock hub kasi tatama sya sa swingarm kung gagamitin mo naman yung stock hub at spacer bubuka naman ang swingarm.. tignan nyo sir yung picture sa post ko medyo dikit na sa swingarm yung sprocket hub..
 

sabat

Super Veteran
kung rb disc ready sir di pwede yung stock hub kasi tatama sya sa swingarm kung gagamitin mo naman yung stock hub at spacer bubuka naman ang swingarm.. tignan nyo sir yung picture sa post ko medyo dikit na sa swingarm yung sprocket hub..
hindi po disk ready ung akin! drum break xa . pinaconvert q lng. pero hindi pasok n pasok ung sprocket hub q!
kya q natanong kung s RB ung stock hub.
 

john_carlo

Super Veteran
kung rb mags na drum stock sprocket hub din gagamitin mo.. kasi pag yung rb sprocket ginamit mo mawawala sa align yung chain.. yung una kong post na black mags rb yun with stock sprocket hub..
 

Noah501

Super Veteran
Madugo talaga magconvert ng disc brake from drum brake amf. Meron dito samin ngooffer pero tamad gumawa kaya kinancel ko nalang. Di ko parin napapakabit yung disc brake ko baka makabili ako ng new mags neto. tsk

ttry ko pa kung may magaling magconvert dito sa CDO ng disc brake. magaantay nlng muna ako ok panaman ang rear brake ko eh.

Hinahanap ko yung HD300 na hub pero di ata yun alam ng tagadito samin. tsk. Any other hub that would fit the stock mags? para di nako magpapalit ng mags la pa kasi budget eh.
 

john_carlo

Super Veteran
Madugo talaga magconvert ng disc brake from drum brake amf. Meron dito samin ngooffer pero tamad gumawa kaya kinancel ko nalang. Di ko parin napapakabit yung disc brake ko baka makabili ako ng new mags neto. tsk

ttry ko pa kung may magaling magconvert dito sa CDO ng disc brake. magaantay nlng muna ako ok panaman ang rear brake ko eh.

Hinahanap ko yung HD300 na hub pero di ata yun alam ng tagadito samin. tsk. Any other hub that would fit the stock mags? para di nako magpapalit ng mags la pa kasi budget eh.
paps di sakto yung rotor ng racing boy sa HDIII hub papagawa ka talaga ng hub mas mabuti paibenta mo yang mags mo bili ka ng disc ready na rb din yung pagbebentahan mo ng mags mo+yung ipagpapaconvert mo halaga na yun ng rb 1.6-1.85 disc ready wala ka pang sakit ng ulo na iisipin kung walang kiwal yung hub na gagawin
 
Top