Qestion about valve spring

[turbulence]

Turbulence is ryt. No nid to wori wen u have stockbore. Its just basic modz. Let we say in 4stages of modz ur in 2nd stage.

hehe may kakampi ako

 

[MasterJAD]

Turbulence is ryt. No nid to wori wen u have stockbore. Its just basic modz. Let we say in 4stages of modz ur in 2nd stage.

paps, can you enlighten me what are those 4 stages of mods? so that i will know.

 

[John Angelo Cantal]

3 stages lng pala bro.

 

[John Angelo Cantal]

Stage1 basic modz
pipe, rcdi, vspring, clutch spring, sprocket combi.
Stage2 basic engine mods.
Rcam, ignition coil, plugcup/wire, clutchplate.
Stage3 engine mods
borekit/rebore, carb, jetting, port n polish, valve set, crankshaft/stroker, timing chain.

 

[turbulence]

3 stages lng pala bro.

4th stage = Lose your weight hehe. the lighter you are, the better

 

[John Angelo Cantal]

4th stage = Lose your weight hehe. the lighter you are, the better

Thats ryt bro.

 

[MasterJAD]

Stage1 basic modz
pipe, rcdi, vspring, clutch spring, sprocket combi.
Stage2 basic engine mods.
Rcam, ignition coil, plugcup/wire, clutchplate.
Stage3 engine mods
borekit/rebore, carb, jetting, port n polish, valve set, crankshaft/stroker, timing chain.

i see...this is it.........

 

[allanboy_g]

4th stage = Lose your weight hehe. the lighter you are, the better

stage four is the most challenging stage of modification...

 

[MasterJAD]

hahaha ..yup...it takes time before we can attain it.

 

[John Angelo Cantal]

Walang kainan ng isang buwan. Haha. Cgurado gaan kna.

 

[MasterJAD]

after a month, somebody will drive your motorcycle because you're injured.

 

[turbulence]

hehe. sarap kumain

 

[lpsnipie_67]

4th stage = Lose your weight hehe. the lighter you are, the better

ito na ata ang pinaka mahirap gawin...

 

[MasterJAD]

ito na ata ang pinaka mahirap gawin...

hahaha...correct

 

[RaTTa2Wee]

stage 5 wasak engine....

 

[newsniper]

@ TS
VALVE FLOAT...like coke FLOAT...joke...
seriously, the valve will float, because too much high RPM,

You will only change your STOCK valve spring, if you are planning to upgrade your CDI to RCDI

example:
1.stock cdi+stock valve spring = OK
2.rcdi+stock valve spring= might cause a valve float, why?! because you don't have any limiter.
*example:
rcdi= 15,000 rpm
stock valve spring 12,000 rpm
you do the math......do you think the stock valve spring can survive the high RPM of your RCDI, base on the example given.

go for
RCDI+VALVE SPRING= then your OK no worries from there.....
then go for clutch spring, cams, pnp ,hi com , carb.....etc..

ride safe!

ask lng sir how about the 2 things u add, rcdi & valve spring only u put others stock? its ok for the engine for life time or evryday use in city?

 

[JhayBoo]

ask lng sir how about the 2 things u add, rcdi & valve spring only u put others stock? its ok for the engine for life time or evryday use in city?

higher rpm...yep for everyday use...

 

[JhayBoo]

ask lng sir how about the 2 things u add, rcdi & valve spring only u put others stock? its ok for the engine for life time or evryday use in city?

Reminder: YOU ARE ON ENGLISH SPEAKING SECTION, Please post in ENGLISH!
​

Hi all members (especially filipinos),

Please be reminded again for the nth time to speak english in ENGLISH SPEAKING SECTION of the forum.
This is to encourage Worldwide YamahaT135 friends & share passion about our motorcycle.
Looking Forward for Understanding...

​

 

[Ginger]

sir question here if i change the vspring, cdi-RCDI, and scam-RCAM but stock bore?? is it ok?? no kaBOOOOOOOOOMMMM??

 

[jangbest]

sir question here if i change the vspring, cdi-RCDI, and scam-RCAM but stock bore?? is it ok?? no kaBOOOOOOOOOMMMM??

There are so many t135 member`s try that mods, and in the end I haven`t heared complain about that mods hahaha .... now I`m planning to have that mods too RCDI , Racing Valve Spring and RCams, I`m on the first stage RCDI High RPM and No limiter heheheh second i planned to have Rvalve srping to add more speed on my snipy ....