Sniper Mx Modifications

[emerson]

sir napapagawa p po b kaya yung mags d nmn sya oblong kaya lang nagkaron ng tama yung gilid yung pinakalabi nya umangat..

 

[buko0]

yes.. just repainted..

did you do it yourself sir?

 

[pedro hunyo29]

did you do it yourself sir?[/qu
i can do the repaint by my self but for the quality i run to the paint shop.. he he he

 

[pedro hunyo29]

sir napapagawa p po b kaya yung mags d nmn sya oblong kaya lang nagkaron ng tama yung gilid yung pinakalabi nya umangat..

ipapalo mo nalang yan sa mga mi kompyansa paps.. yan din ginawa ko.. successfull din naman..

 

[bhek_21]

sir napapagawa p po b kaya yung mags d nmn sya oblong kaya lang nagkaron ng tama yung gilid yung pinakalabi nya umangat..

ipapalo mo nalang yan sa mga mi kompyansa paps.. yan din ginawa ko.. successfull din naman..

As far as I know, it should be heated first then hydraulic press.. this is the technique of the machine shop that I've inquired before.. I don't know if it has an adverse effect on our mags material due to heat but it's quite more reliable than hammering it.. This is just my opinion..

By the way.. I like the 15-44 combi..

 

[pedro hunyo29]

As far as I know, it should be heated first then hydraulic press.. this is the technique of the machine shop that I've inquired before.. I don't know if it has an adverse effect on our mags material due to heat but it's quite more reliable than hammering it.. This is just my opinion..

By the way.. I like the 15-44 combi..

how's the performance paps?

 

[KARDING-SUNGKIT]

is it possible that 16t will "FIT" in front sprocket of SMX???im still planning to test it with other combi if ever it fits

 

[Mono]

sir napapagawa p po b kaya yung mags d nmn sya oblong kaya lang nagkaron ng tama yung gilid yung pinakalabi nya umangat..

they'll torch it first to soften the part that needs to be aligned..you don't need hammer in your case.. they can use vice grips.. just like what the manong lolo did to my bengkong mags before

fyi: he knows what he's doing..and it always depends on where you want to want to take the risk...i mean choosing whose gonna work on your stuff

 

[Emmanuel S. Escoto]

check out my wife's Sniper MX

https://www.facebook.com/media/set/?set=a.355492651209581.85695.100002465486487&type=3

 

[emerson]

nice pipe sir.. home i meet your mx to hear the sound personally..

 

[Emmanuel S. Escoto]

nice pipe sir.. home i meet your mx to hear the sound personally..

thanks!

 

[bhek_21]

how's the performance paps?

The performance is ok for me.. Hehehe 2.93 gear ratio compared to gear ratio of 14-42 which is 3.0..
And SSS aluminum is light weight and so with 415 chain..

 

[pedro hunyo29]

what brand of Valve spring are the best? pls. help..

 

[bhek_21]

what brand of Valve spring are the best? pls. help..

what is your engine set-up sir?

 

[suiluj]

i like to know what is your fuel consumption after making mods to your sniper mx? mine got average 36 km/liter. always maximizing every gear and 100 - 120 kph on open road.

 

[buko0]

i like to know what is your fuel consumption after making mods to your sniper mx? mine got average 36 km/liter. always maximizing every gear and 100 - 120 kph on open road.

city driving or long rides?

 

[suiluj]

city driving or long rides?

both. city driving and long rides. got rcdi,valvespring, rcam, cluctch spring.

 

[buko0]

both. city driving and long rides. got rcdi,valvespring, rcam, cluctch spring.

36 km/liter? w/ that mods? wow. isn't that big?

 

[pedro hunyo29]

what is your engine set-up sir?

only RCDI clutch spring and a little re-jetting the CARB.

 

[bhek_21]

only RCDI clutch spring and a little re-jetting the CARB.

Maybe sir you should try Vixion valve spring since it's yamaha OEM parts for 150cc engine displacement..