clydelisboa
New Member
hmmm interesting topic, im happy with my orig yamaha valves. i dont want any suzuki engine part to be a part of my sniper, gudluck sa mga magmomods ng valves
Tips sa set up ng T135
- Thread starter jefraider
- Start date
- Status
X Project
Super Veteran
Now i got ittraxxas-modifier said:
bro instead of turnohin yung retainer para papasok ang shim
what if ang shim ang bawasan ng diameter para salpak diretso
sa retainer? anyway whats important lang naman is ang thickness?
what do you think?
Also confirm lang clearance is .0010 at .0013 sa feeler guage, thats in inches right?
0.0010 inches = 0.025 mm
0.0013 inches = 0.033 mm
confirmed ba? super super nipis na pala.
stock valve clearance ng stock valvehead is
0.10mm at 0.16mm
TECHNICALLY TRABAHOSO
pala talaga itoalso dapat ang gagawa ng Valveseat sa head ay marunong at hinde lang turno ng turno basta lang mabilog.
a small leak (less than a hairstrand) in valves equal loose compression bad performance, tama ba xproject?
Hinde ba kayang i valve lapping ng grinding compound ang difference ng 19mm to 22mm para wala ng machine shop?[/quote:2lhds0bx]
My bad bro, yung clearance is in mm hindi inch... So .05mm sa lahat ng valves... Yung stock retainers natin hindi papasok ng maayos yung spring ng Raider so dapat Raider valves, shim at retainers... Hindi kayang tornohin ang shim, ewan ko lang sa machine shop jan bro... Instead, bawasan muna yung valve tip para pasok na agad sa Raider retainers, kuha ba? I just remembered everything again nung nakausap ko si Lincx this morning... Nakakalito din kasi pag hindi actual dahil baka may ma missed out tayo...
Recap:
Bawasan ang valve tip (paki sukat na lang ang pinaka safe na putol yung hindi tatamaan yung bewang ng stem, cant remember if 1mm yung binawas sa lahat)
Use Raider valve spring para hindi mag coil-bind
Raider retainers para hindi sumayaw ang springs
at Shim 2.20 parama accomodate yung shortness ng valves at hindi umigkas ang tapet screw sa tip...
Yung mag momodify nito, it would be best to call me up first kasi hindi ko mailalagay lahat dito sa forum yung procedures sobrang holistic at tedious...
X Project
Super Veteran
[/quote:33pssf3u]traxxas-modifier said:
Hindi pwede yan bro... Try to simulate or just simply imagine, kaya ba pantayin ng kamay natin ang applied pressure sa lahat ng valves para pumantay yung apat na seats? Syempre hindi di ba... 2nd hindi natin kayang ubusin just by using grinding compound to accurately bring the diameter to perfect 22mm and 19mm... Pag dating sa valve seats, there's a huge difference between Accuracy and Precision... Talk about classical dilemma of accuracy and precision...
tashrey_888
Super Veteran
nice mods mga papy,but wala ako guts mag bigvalves.... hehehe stick to stock valves nalang muna...
tashrey dont need bigvalve because his stockhead can match with bigvalve boys courtesy of the caterpillar parts hehehe
courtesy of the caterpillar parts hehehe
highlander
Veteran
mga master psingit lng po abt valve clarance..wat po d best gamitin sukat?tia
tashrey_888
Super Veteran
Xproject: hahaha your right papy X, the setting up my bike is Zoo racing medyo low profile lang.. hehehe
Sir Traxx: sobra naman yan bos.. Pang john deere lang ..hahahaha
Sir Traxx: sobra naman yan bos.. Pang john deere lang ..hahahaha
turbulence
Super Veteran
wla bang nabibili na dati ng big valve head mga masters? hindi ba mas matakaw sa gasolina yan?
X Project
Super Veteran
@Jefraider: Thanks din sa pag sagot mo sa queries ng ibang forumers, laking tulong din pati sakin...
@Turbulence:
Meron, yung stock head ng Sniper na ginawang R150 valves, galing Thailand... Pag binili mo yun, lilipat mo lang yung kulang na parts from your stock pero syempre maglalagay parin ng shim at same procedure gaya nung unang posts ko... Pero kung trip mo yung plug and play, meron tayo galing Indo at Thai... 20k up depende sa specs... May bigvalve head ako using R150 valves na binigay ko kay bro Nanix, pm nyo siya baka trip nya ibenta... Thanks!
@Turbulence:
Meron, yung stock head ng Sniper na ginawang R150 valves, galing Thailand... Pag binili mo yun, lilipat mo lang yung kulang na parts from your stock pero syempre maglalagay parin ng shim at same procedure gaya nung unang posts ko... Pero kung trip mo yung plug and play, meron tayo galing Indo at Thai... 20k up depende sa specs... May bigvalve head ako using R150 valves na binigay ko kay bro Nanix, pm nyo siya baka trip nya ibenta... Thanks!
turbulence
Super Veteran
R150? raider 150 ba yan sir? wow gold naman ang presyo... Musta naman performance sir?X Project said:
turbulence
Super Veteran
@x project
kelangan ng master mechanic niyan sir hehe
kelangan ng master mechanic niyan sir hehe
turbulence
Super Veteran
nakakaadik kc magpatakbo master. parang mas maxarap ng lumipad hehehe. hindi na ba pedeng everyday use pag may bigvalve master?oicat said:
- Status