what gear is that 9000rpm?
4th gear?
if yes thats normal.
try to change sprocket to lowspeed and you will have 10k+ rpm

remember that rpm on 4th gear will depend on your sprocket ratio and engine performance.
to test the maximum rpm of your valvespring before it floats, you need to test
it on 1st or second gear, it will reach 12500rpm (stock cam with vixion valvespring)
while stock valvespring will only reach 10,000rpm on 1st/2nd gear.
me i use now VIXION VALVESPRING and it reaches 12500rpm 1st,2nd,3rd gears.
while on 4th gear, ive tried 10150rpm(veypor tachometer) at sniper speedo of 150kph
valvespring not floating yet, i can reduce the sprocket ratio to attain more rpm if i want to on 4th gear.
remember that valvespring change will increase your top speed on 1st,2nd,3rd gear.
you cannot test it on 4thgear since on that gear, its your engine that will limit the rpm
and not the valvespring (unless you have a very lowspeed sprocket ratio).
if you really want to see the difference of with stock valvespring or using another valvespring.
put back the stock speedo, with that you can compare their difference.
btw, set your koso speedo setting to 109% to get the stock speedometer reading (assuming you have a stock tiresize). hehehe
one more tip, you need to have a aftermarket cdi first before aftermarket valvespring
else your valvespring change is useless.
you can also gauge your bike with valvespring with another sniper using stock valvespring
and compare their top speed in each gears.
with that you can really see if its worth to change your stock valvespring
