Newbie Question Post It Here!!! [part V]

[macoolet]

any suggestion bro?.. ano gamit mo and price niya and where to find origs?..

vikousi hehehe pricey compare sa mga bagong labas na HID ngayon...pero sure naman

 

[jcm1130]

vikousi hehehe pricey compare sa mga bagong labas na HID ngayon...pero sure naman

pa pm bro how much and where to buy? para mapag-iponan na.. thanks for your response..

 

[macoolet]

pa pm bro how much and where to buy? para mapag-iponan na.. thanks for your response..

contact xiatglaz of MCP..valenzuela area sya..location mo ba..X9 din naman ok hehehe

 

[thon]

mga bro, ano ba maganda brand ng HID? at price niya?

Im using X9 HID. 1 year and 2 months ko nang gamit, ok pa rin naman. 1500 dati bili ko pero mas mura na yata ngayon HID.

 

[rich_havens]

vikousi hehehe pricey compare sa mga bagong labas na HID ngayon...pero sure naman

satisfied vikoushi hid user here since november 2009 to present installed by paul garcia of the lighthouse

 

[towendz]

Haha! Alam ko yun ABS herbal extract naman yun. Ano kaya epekto sa sniper natin nun?

hahaha!! loko paps.. anu nga kaya??

 

[mry. 522]

best valve spring for sniper help?
advantage of
soft valve spring??___________________
medium valve spring??________________
hard valve spring??____________________
help????

 

[suiluj]

Some body know how to fix my HID problem. my HID will not Turn On after i used for less than 1 hour. it only happen when i switch off my Engine then when i turn on again my HID will not light. some sound i hear like grounded. day later it will switch on again my HID will light. my battery is in good condition not lowbat.​

 

[jcm1130]

contact xiatglaz of MCP..valenzuela area sya..location mo ba..X9 din naman ok hehehe

Im using X9 HID. 1 year and 2 months ko nang gamit, ok pa rin naman. 1500 dati bili ko pero mas mura na yata ngayon HID.

thanks for the reply mga bro.. will consider your inputs.. pampanga area me..

 

[ronald031803]

Some body know how to fix my HID problem. my HID will not Turn On after i used for less than 1 hour. it only happen when i switch off my Engine then when i turn on again my HID will not light. some sound i hear like grounded. day later it will switch on again my HID will light. my battery is in good condition not lowbat.​

you have some lose wire from ballast to bulb

 

[tolitz]

Ok lang po b n malagitik ung mc ko after kc nung adjustment ng valve clearance? Anu kaya dahilan bat gnun? Anu mganda gwin para mawala un? Tnx po.

 

[tolitz]

Ok lang po b n malagitik ung mc ko after kc nung adjustment ng valve clearance? Anu kaya dahilan bat gnun? Anu mganda gwin para mawala un? All Stock lang po mc ko.

 

[jcm1130]

Ok lang po b n malagitik ung mc ko after kc nung adjustment ng valve clearance? Anu kaya dahilan bat gnun? Anu mganda gwin para mawala un? All Stock lang po mc ko.

baka hindi tinamaan ng maayus yung right clearance bro.. try mu ibalik dun sa nagadjust.. dapat smooth at tahimik lang ang engine.. pipe lang maingay, hehe..

 

[jcm1130]

Some body know how to fix my HID problem. my HID will not Turn On after i used for less than 1 hour. it only happen when i switch off my Engine then when i turn on again my HID will not light. some sound i hear like grounded. day later it will switch on again my HID will light. my battery is in good condition not lowbat.​

baka loose connection lang bro, double check your wirings..

 

[lospeeder]

Ok lang po b n malagitik ung mc ko after kc nung adjustment ng valve clearance? Anu kaya dahilan bat gnun? Anu mganda gwin para mawala un? All Stock lang po mc ko.

hmmmn.. possible sa valve clearance..pa try mo stock clearance.

 

[Paladin]

any suggestion bro?.. ano gamit mo and price niya and where to find origs?..

Honestly speaking I don't know how to whether it's original or not. I use X9 HID, after more than one year it's still working with no problem.

Some body know how to fix my HID problem. my HID will not Turn On after i used for less than 1 hour. it only happen when i switch off my Engine then when i turn on again my HID will not light. some sound i hear like grounded. day later it will switch on again my HID will light. my battery is in good condition not lowbat.

Grounded sound may indicate grounded electricals due to either loose or wrong wiring set up. It's your flasher that is most likely to sound so I suspect grounded wiring. Also check your relay, It may got wet during the rains or when you do car wash.

Ok lang po b n malagitik ung mc ko after kc nung adjustment ng valve clearance? Anu kaya dahilan bat gnun? Anu mganda gwin para mawala un? Tnx po.

Whats your cam set up and tappet settings? Tik tik sound depends on the height of your tappet setting.

 

[guitarizta]

the same here, it's been 2 weeks since my last tune-up it is only yesterday that i noticed a tik-tik sound in my engine which before i don't notice.
the clearance that I said to the 3s mechanic is .10 and .16 and all my MC is all stock engine parts no modification done.

 

[jamskie]

pano po linisan ang piston dun sa may disk brake sa harap po? and ano po ang materials na need?sumasayad kasi ang disk brake. kaya pala umiinit pag nag bya byahe. thanks.

 

[macoolet]

pano po linisan ang piston dun sa may disk brake sa harap po? and ano po ang materials na need?sumasayad kasi ang disk brake. kaya pala umiinit pag nag bya byahe. thanks.

spray lng ng wd40 papa...tapos ipit mo ulet disc piga lng ng piga..or kung mtyaga ka,tangalin mo disc,pindutin mo preno,lalabas ng sagad un piston,bugahan mo wd40 tska mo punasan..tpos ibuka mo ulit,ipit mo disc,preno mo ng preno..tpos konting liha dun pala sa lining at hugas ng sabon na panlaba..

 

[febe gienel celebria]

papz ask lng po ako.. kanina po pag on ko ng ignition ko hndi umilaw yung neutral indicator at temp.. at hndi ko ma e.start engine ko.. tpos pinatay ko muli ang ignition switch ko at inun ko uli.. at ayun umilaw na at na start ko na.. saan kya ung my maluwag na wiring?? or anu problema??