• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

[TIPS] Optimum Air Fuel settings for your T135

goff_d_p

Super Veteran
i have 16f/42r with a 428H DID chain. It's not much of a wheelie, but it's more than it was before. I don't want to burn out my clutch so i don't try doing wheelies from 1st. gear. I'm not really even trying from 2nd. but if i'm hard on the throttle it does it.
 

traxxas-modifier

Super LOLO
Staff member
goff_d_p said:
Hey Traxxas, I got a question, I installed the new main and pilot jets you sent me, but it's kinda weird. I put my bike back together but when i ride, the bike chokes. that's with the racing air filter i have, But if i take off the air filter it's fine.
It's so quick that when i switch to 2nd gear the front of the bike lifts off the ground. My Brother-in-law tested it after i did the change, to make sure it was running ok, and it really was lifting off the ground when he switched to 2nd. should it really give it that much power like that?

I tried the a/f at 1 1/2 turn at first, i couldn't go past 40 in first gear, so i tried 2 full turns it was better, but still seemed like it was lagging, it's now at 3 full turns and no problems. what would be your recommendations Traxx?
bro that means your racing filter is restricting air intake in your carb.
try to find better free flow airfilter.
invest on k&n air filter bro

regarding air fuel screw setting.
i cant recommend a specific turns.
you really have to find the best setting that works in your place :)
 

sigea

New Member
Bro traxxas, maybe you could post a video on how the bike sounds like (when idling) with the correct settings.. Maybe that could help since settings are different for different places but who knows maybe the idling sound would help a lot? just suggesting :D
 

goff_d_p

Super Veteran
well when my cousin ( who's a real Yamaha Mechanic in Brunei )was here he tuned it up, it still sounds the same, but running wise is different. If i sit there at idle or revving, it sounds good. but when driving i still have slight backfire and some hesitant in 1st. gear.
 

phl6684

Moderator
Staff member
try check ur pipe packing...maybe it loose or has a tiny little hole..mine have this problem before..change the pipe packing n its ok..dont have backfire anymore..huhu
 

kurarensu

Veteran
can i ask what's the easiest way to remove the sparkplug.. possible to do so w/o removing the side fairings?

wanna go check my plug color..
 

kurarensu

Veteran
eew.. guess i've no choice.. btw do u all do sparkplug gapping?? what tools u all use? i cant seems to find any tools at my place
 

depedal

Super Veteran
i have tried this. before i tried this, my engine always turns off whenever there is sudden stop or sudden down shift from 3rd down to 2nd to do u-turn. or whenever im idle.

after i followed the settings mentioned here, my previous problem disappeared. hope i did not set a/f mixture so high. i feel that the performance is better.
 

addison

New Member
can we adjust the needle position of our carb? when I try to open mine looks like have a plastic bonded to the needle.
 

marcusfilter

Moderator
Staff member
addison said:
can we adjust the needle position of our carb? when I try to open mine looks like have a plastic bonded to the needle.
Yap you can try it one space at a time. Sometimes there will be a good result.

ride safe
 

Snippy

New Member
2 1/2 turn a/f mixtures really work
for me in my stock bike i loved the
performance, the pick up when you
s quiz the throttle really feel the power
i feel also the consumption on my gas
hehehe....

so in stock sniper i really rcommend
the 2 1/2 turn A/f mixtures and 1teeth
bigger in rear sprocket for better acceleration
so you have now the 15/40 sprocket combi
like mine..... 8) :)
 

syfull

New Member
well,my sprocket setting now is 15/41...i guess the acceleration is better..n my air/fuel setting is 1 3/4(i think...)n it runs smoothly..i luv my Spark...when i ride,i just hear the wind hehe
 

sigea

New Member
guys.. since we all know the stock number of turns for the air/fuel screw.. what about the idling screw? how many turns is it for stock set up?
 

2b1ask1

Super Veteran
help, just turned my pilot air screw to 2 turns counter and i got hiccups on my bike, turned 2 1/4 major hiccups. tuned it back to factory settings no hiccups, is there something wrong with my bike? still using stock jets, exhaust and air filter but using denso iridium SP. all test made revving at neutral.
 
Top