Vixion Block Or Jvt 57mm?

[sniping_area]

Which one do you prefer?

JVT +10000000000000000000000000000000000000000 no need to shave!!!

 

[blu_08]

@odie_perry44 you can contact him dis # 09195734142 just tell me u where reffered by blu.

 

[milu]

I'm also looking at vixion kit 57 mm... Does it need shaving?

 

[ambokz]

tis my first time to try engine upgrade with my stock snipey, plan to buy vixion kit 57mm (as per suggestions here)is it ok to use that kit with my a stock carb,valve spring,etc?tia masters...just want to have enlightenment,as it is my first engine mods.

 

[suplado010]

tis my first time to try engine upgrade with my stock snipey, plan to buy vixion kit 57mm (as per suggestions here)is it ok to use that kit with my a stock carb,valve spring,etc?tia masters...just want to have enlightenment,as it is my first engine mods.

there will be no power if you dont change your cam,valve spring and cdi...

 

[ambokz]

there will be no power if you dont change your cam,valve spring and cdi...

ah ok,but for the mean time this set up will do right?(short budget for now).hehehe..thanks

 

[bhek_21]

@abraham

Sir both are good.. Vixion Kit is okay since it is OEM of Yamaha.. But when it comes to race spec, JVT 57mm kit is the one,, IMHO..

@ambokz

There will be an additional power when you change to 57mm bore kit.. BUT it requires supporting upgrades to maximize the power it can bring out and you can be sure that there will be no trouble afterwards.. Maybe we can still hear feedbacks from masters out there..

 

[suplado010]

ah ok,but for the mean time this set up will do right?(short budget for now).hehehe..thanks

parang stock power padin yan pramis...hehe....saken nga nakavixion kit,cdi,v.spring,cms cam filing ko stock padin...

 

[abraham]

parang stock power padin yan pramis...hehe....saken nga nakavixion kit,cdi,v.spring,cms cam filing ko stock padin...

HAHA! grabe ang need for power mo sir ahh.. baka 62mm will do for you..

 

[suplado010]

HAHA! grabe ang need for power mo sir ahh.. baka 62mm will do for you..

maliit lang po kasi additional power ng vixion kit sa motor naten so kung hindi naten susuportahan ng ibang parts lalung hindi mo mararamdaman si vixion kit...

 

[rowan]

they were both good bkit pa kayo magtalo hehehe . you know what we do old vixion kit block with jvt piston . you can make it semi dome piston . after shaving your block at any desired limit.

 

[(sukiyama)]

im planning to get jvt 59 cb, is it good for stock head or need to change to bv head. thanks

 

[bhek_21]

im planning to get jvt 59 cb, is it good for stock head or need to change to bv head. thanks

Sir I think it's ok even your on stock head.. unless your engine compression is high, you can change to bv head.. this is a recommendation from a mechanic that I know.. Because a friend of mine uses already a 63mm bore but he didn't advices him to change into bv head since his engine compression is not that high..

 

[suplado010]

im planning to get jvt 59 cb, is it good for stock head or need to change to bv head. thanks

swak nah swak..

 

[ambokz]

ah ok...thanks mga masters..gradual lang ung pag engine mods ko.hehehe

 

[hubert135]

L/F JVT 57mm piston kit.pm me 2ndhand or bnew

 

[suplado010]

ah ok...thanks mga masters..gradual lang ung pag engine mods ko.hehehe

maganda niyan papa ipunin niyo nalang poh muna yung parts then tsaka niyo ipakabit ng sabay sabay..para isang baklasan lang..sayang din kasi labor..mahal pah naman labor sa sniper kasi napakahirap buksan...pagtanggal lang ng fairings nakakapagod nah..hehe

 

[ambokz]

Tama paps,yan ung nasa isip ko,pra sabay na ang pag install at pagbaklas,tas isang byaran lang sa labor.hehehe

 

[Takumi13]

Does a 62mm bore can break our conrod?

 

[lpsnipie_67]

104 kph @ 3rd gear not in full throttle no more guts to use 4th gear thats vixion kit + tweaks...