• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

Sniper Mx Modifications

Gerry Jaloro

Super Veteran
Hi mga papa...what is the best sprocket combi of this set

UMA SUPERHEAD + UMA 62mm bore + 28mm carb UMA

currently i'm using 14x42 which is not good for the above set.
14-42 is good for stock bore...
in your current specs you need high speed combination, smaller sprocket like 38t and bigger pinion like 15t... IMO
 

ESOJ de GUZMAN JR

Super Veteran
Hi mga papa...what is the best sprocket combi of this set

UMA SUPERHEAD + UMA 62mm bore + 28mm carb UMA

currently i'm using 14x42 which is not good for the above set.
my frnd is 62mm + 22/20 big valve + 30mm sunworld D-slide. he's sprocket combi is 14-36. try sir. ganda response same with relax engine.
 

reymond pombo

New Member
Stock sprocket combination much better.. My mc top speed 130kph all stock. when i changed the mode of my mc i change it to 14/38 it almost same as stock but i top at 160kph this is the load of my bike crg cluch spring, oko flatslide carb 28, pj 39 mj 112 rextor cdi uma high cam, jvt v.spring yun lang po stock bore is powerful
wow ang lakas nman nang mot2x mo amegus
 

reymond pombo

New Member
s
Stock sprocket combination much better.. My mc top speed 130kph all stock. when i changed the mode of my mc i change it to 14/38 it almost same as stock but i top at 160kph this is the load of my bike crg cluch spring, oko flatslide carb 28, pj 39 mj 112 rextor cdi uma high cam, jvt v.spring yun lang po stock bore is powerful
sniper kaba amegus?
 
Stock sprocket combination much better.. My mc top speed 130kph all stock. when i changed the mode of my mc i change it to 14/38 it almost same as stock but i top at 160kph this is the load of my bike crg cluch spring, oko flatslide carb 28, pj 39 mj 112 rextor cdi uma high cam, jvt v.spring yun lang po stock bore is powerful
mamaw? lakas naman nyan papa... :dance: parang naka superhead at 62mm bore narin pala :dance:
 

xclickclickx

Veteran
malossi 63mm big bore kit
ahm exhaust customised with modified KTM530 muffler
brt racing CDI
custom cylinder head
lightened flywheel -250grams
CMS 22in-19ex valves
appii valve springs
uma racing coil
tmr28mm carb
uni airfilter
modified camshaft sprocket
removed decompression setup
CMS cam
2 ground wires (1 extra thick and extra low and long)
shortened levers
modified 320mm racing boy disc brake
front fork stabilizer
front sliders
green parking lights
custom AIS removal kit
RK aluminium rear sprocket
custom graphics
side gap spark plug
runs on synthetic oil and 95+ octane fuel always warmed up before using
.....
......
......
list goes on
 

stacynlheslloyd

New Member
my new sniper mx all stock reach 110kph
with some engine tweak & sprocket change 140kph
engine:
vixion valve spring
uma racing cdi
remove base gasket
kalkal stock pipe
14-42 combi sprocket
and some lighting modes
Just curious Sir. What is base gasket and where is it located. TIA...
 

Januar

New Member
hi!guyz,im new here..i just read all your different stories about the mod of your MC..i need some help to my mc also coz it has a limiter..so,is there any posible way to cut my limiter of my mc w/out harming my engnine?i read some discussion about changing cdi to rcdi can harm your engine w/out changing also the valve spring..is that true?coz im palnning to install rcdi to my mc and what is the brand for everyday use touring and for long run?need some advice guyz..thnks...;)
 

Gerry Jaloro

Super Veteran
hi!guyz,im new here..i just read all your different stories about the mod of your MC..i need some help to my mc also coz it has a limiter..so,is there any posible way to cut my limiter of my mc w/out harming my engnine?i read some discussion about changing cdi to rcdi can harm your engine w/out changing also the valve spring..is that true?coz im palnning to install rcdi to my mc and what is the brand for everyday use touring and for long run?need some advice guyz..thnks...;)
Backread bro... :coffee:
 

Januar

New Member
hmmm...not bad..i think it's normal to reach 120 kph for all stock bro...mine i got 125 kph at a quarter mile..but when my leovice is installed.i reach only 120 kph bcoz of the cdi limiter they said...
 

Januar

New Member
Eh guyz,i have some doubts about our mc bcoz it say's 135.but on our stock mc the top speed is only 120.but the Honda wave 125 the top speed is 120 all stock.na subukan ko na yan..

But when we go for a road trip together with my frnds going to pagadian city for about 4 hrs drive.on a long strech i reach my TS 120 kp/h and the wave 125 reach the TS 120 kp/h but his behind for about 100 meters when i ask him about his TS..anybody can explain about this?masters out there...?sabay nmn Kami sa arangkada nauna pa nga xa sa akin nkahabol nlang ako nung nka 3rd -4th gear na ako..tapos sa 5th un na malayo na ako..my mx got 14/39 sprocket combination.Pero kaka iba ung andar nya kompara ko sa ibang mx sa mga kasama ko..
 
Top